MIL-DTL-8971F
1.3 Part or identifying number (PIN). The PIN to be used for electrodes acquired to this
specification is created as follows:
M 8971 - X
Type:
1 - Type I - Disk electrode
2 - Type II - Rod electrode
Specification number
Denotes military specification
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Non-government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
- Sampling Procedures and Tables for Inspection by
Attributes
(Copies of this document are available online at https://www.asq.org/ or from American Society
for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.)
ASTM INTERNATIONAL
ASTM C559
- Standard Test Method for Bulk Density by Physical
Measurements of Manufactured Carbon and
Graphite Articles
ASTM C651
- Standard Test Method for Flexural Strength of
Manufactured Carbon and Graphite Articles Using
Four-Point Loading at Room Temperature
ASTM C1161
- Standard Test Method for Flexural Strength of
Advanced Ceramics at Ambient Temperature
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business